Airworthiness Directives; GROB-WERKE Model G120A Airplanes

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule; correction.

SUMMARY:

This document makes a correction to Airworthiness Directive (AD) 2005-13-09, which published in the Federal Register on August 23, 2005 (70 FR 49184), and applies to certain GROB-WERKE Model G120A airplanes. AD 2005-13-09 requires replacement of the main landing gear (MLG) up-lock hook assembly. Current language in paragraph (e)(2) of AD 2005-13-09 incorrectly references the MLG up-lock assembly as “elevator and aileron hinge pins.” This AD corrects that paragraph to reference the appropriate part number MLG up-lock hook assembly.

DATES:

The effective date of this AD (2005-13-09) remains July 26, 2005.

FOR FURTHER INFORMATION CONTACT:

Karl Schletzbaum, Aerospace Engineer, ACE-112, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: 816-329-4146; facsimile: 816-329-4090.

SUPPLEMENTARY INFORMATION:

Discussion

On August 15, 2005, the FAA issued AD 2005-13-09, Amendment 39-14146 (70 FR 49184, August 23, 2005), which applies to certain GROB-WERKE Model G120A airplanes.

AD 2005-13-09 requires replacement of the MLG up-lock hook assembly. Current language in paragraph (e)(2) of AD 2005-13-09 incorrectly references the MLG up-lock assembly as “elevator and aileron hinge pins.” This AD corrects that paragraph to reference the appropriate part number MLG up-lock hook assembly.

Need for the Correction

This correction is needed to ensure that reference to the MLG up-lock hook assembly part number is correct for future reference. All airplanes currently on the U.S. Register have the actions of AD 2005-13-09 incorporated.

Correction of Publication

Accordingly, the publication of August 23, 2005 (70 FR 49184), of Amendment 39-14146; AD 2005-13-09, which was the subject of FR Doc. 05'16440, is corrected as follows:

On page 49184, in § 39.13 [Amended], in paragraph (e)(2), replace the Current Text in the Actions column with the Replacement Text.

Current Text: “(2) For all serial numbers: Do not install any elevator and aileron hinge pins that are not part number SY991A hinge pins.”

Replacement Text: “(2) Do not install any MLG up-lock hook assembly that is not part number X03-0020-00-00.00/1 (or FAA-approved later part number that supersedes this part number).”

Action is taken herein to correct this reference in AD 2005-13-09 and to add this AD correction to § 39.13 of the Federal Aviation Regulations (14 CFR 39.13).

The effective date remains July 26, 2005.