AGENCY:
U.S. Customs and Border Protection, Department of Homeland Security.
ACTION:
Notice of accreditation and approval of SGS North America, Inc., as a commercial gauger and laboratory.
SUMMARY:
Notice is hereby given, pursuant to CBP regulations, that SGS North America, Inc., has been approved to gauge and accredited to test petroleum and petroleum products for customs purposes for the next three years as of January 14, 2016.
DATES:
Effective Dates: The accreditation and approval of SGS North America, Inc., as commercial gauger and laboratory became effective on January 14, 2016. The next triennial inspection date will be scheduled for January 2019.
FOR FURTHER INFORMATION CONTACT:
Approved Gauger and Accredited Laboratories Manager, Laboratories and Scientific Services Directorate, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW., Suite 1500N, Washington, DC 20229, tel. 202-344-1060.
SUPPLEMENTARY INFORMATION:
Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that SGS North America, Inc., 20535 Belshaw Ave., Carson, CA 90746, has been approved to gauge and accredited to test petroleum and petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13. SGS North America, Inc., is approved for the following gauging procedures for petroleum and certain petroleum products set forth by the American Petroleum Institute (API):
| API chapters | Title |
|---|---|
| 3 | Tank gauging. |
| 7 | Temperature Determination. |
| 8 | Sampling. |
| 12 | Calculations. |
| 17 | Maritime Measurements. |
SGS North America, Inc., is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM):
| CBPL No. | Std. method | Title |
|---|---|---|
| 27-03 | ASTM D4006 | Standard Test Method for Water in Crude Oil by Distillation. |
| 27-04 | ASTM D95 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. |
| 27-05 | ASTM D4928 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration. |
| 27-06 | ASTM D473 | Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method. |
| 27-11 | ASTM D445 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids. |
| 27-13 | ASTM D4294 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry. |
| 27-46 | ASTM D5002 | Density of Crude Oils by Digital Density Meter. |
| 27-48 | ASTM D4052 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter. |
| 27-54 | ASTM D1796 | Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method. |
| N/A | ASTM D482 | Standard Test Method for Ash from Petroleum Products. |
| N/A | ASTM D4007 | Standard test method for water and sediment in crude oil by the centrifuge method (Laboratory procedure). |
| N/A | ASTM D5705 | Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils. |
| N/A | ASTM D6352 | Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography. |
Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344-1060. The inquiry may also be sent to cbp.labhq@dhs.gov. Please reference the Web site listed below for a complete listing of CBP approved gaugers and accredited laboratories. http://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories .
Dated: September 22, 2016.
Ira S. Reese,
Executive Director, Laboratories and Scientific Services Directorate.
[FR Doc. 2016-23467 Filed 9-27-16; 8:45 am]
BILLING CODE 9111-14-P