S.C. Code Regs. § 61-79.261.J.194

Current through Register Vol. 48, No. 4, Aril 26, 2024

Section 61-79.261.J.194 - General operating requirements

(a) Hazardous secondary materials or treatment reagents must not be placed in a tank system if they could cause the tank, its ancillary equipment, or the containment system to rupture, leak, corrode, or otherwise fail.

(b) The remanufacturer or other person that stores or treats the hazardous secondary material must use appropriate controls and practices to prevent spills and overflows from tank or containment systems. These include at a minimum:

(1) Spill prevention controls (e.g., check valves, dry disconnect couplings);

(2) Overfill prevention controls (e.g., level sensing devices, high level alarms, automatic feed cutoff, or bypass to a standby tank); and

(3) Maintenance of sufficient freeboard in uncovered tanks to prevent overtopping by wave or wind action or by precipitation.

(c) The remanufacturer or other person that stores or treats the hazardous secondary material must comply with the requirements of section 261.196 if a leak or spill occurs in the tank system.

S.C. Code Regs. 61-79.261.J.194

Added by State Register Volume 44, Issue No. 06, eff. 6/26/2020.