N.H. Admin. Code § Saf-C 6507.01

Current through Register No. 44, October 31, 2024

Section Saf-C 6507.01 - Installation of Enhanced Technology Ignition Interlock Device

(a) The interlock service provider shall not permit the user of the device to view the installation of the device.

(b) At the initial device installation, the user shall be required to pass at least 3 breath tests on a functioning device to demonstrate the user's proficiency in the normal operation of the device. No interlock service provider shall install a device in a vehicle of a user who is unable to pass the breath test.

(c) After installation of a device, the interlock service provider shall inspect the vehicle and device to ensure that the device is functioning properly, reliably, and accurately and that the device does not interfere with the normal operation of the motor vehicle.

(d) The interlock service provider shall provide the user and the division with a certificate of installation that contains, at minimum, the following:

(1) The date of the installation;

(2) The name and address of the interlock service provider;

(3) The name of the technician that installed the device;

(4) The following motor vehicle information:

a. License plate number;

b. The year, make and model of the vehicle;

c. Vehicle identification number; and

d. The name of the vehicle owner(s);

(5) The serial number of the device;

(6) Handwritten or electronic initials of the technician indicating the device is in calibration;

(7) Handwritten or electronic initials of the technician indicating the device and vehicle are functioning properly;

(8) Handwritten or electronic initials of the technician indicating a camera is installed and positioned properly to capture the user of the device;

(9) Initials of the user, acknowledging the following:

a. Proper use of the device, maintenance, and service resolutions;

b. An understanding of how to power on and off the device;

c. Delivered and passed 3 breath samples;

d. An understanding of violation causes and consequences;

e. An understanding of the rolling re-test feature;

f. An understanding of the lockout features and procedures; and

g. An understanding that violations defined in Saf-C 6509 might result in extension of participation in the program and installation of the device.

N.H. Admin. Code § Saf-C 6507.01

#7996, eff 12-1-03; ss by #10082, eff 1-31-12

Amended by Volume XLII Number 41, Filed October 13, 2022, Proposed by #13448, Effective 9/20/2022, Expires 9/20/2032