N.H. Admin. Code § Saf-C 5023.02

Current through Register No. 44, October 31, 2024
Section Saf-C 5023.02 - Operator Requirements
(a) For each electrical display firing, the operator shall comply with the following:
(1) All firing shall be done from a remote central control location that provides the operator(s) with an unobstructed view of the entire display;
(2) All wiring and firing system set-up shall be done under the direct control of the operator who shall also insure that the firing device or control panel is properly safeguarded; and
(3) Prior to the display, precautions shall be taken to preclude the possibility of premature ignition due to stray sources of electrical or radio frequency energy.

N.H. Admin. Code § Saf-C 5023.02

(See Revision Note at Chapter heading for Saf-C 5000) #6055, eff 7-1-95; amd by #7481, eff 4-25-01; paragraphs (a)(2)-(3) EXPIRED: 7-1-03; amd by #8117, INTERIM, eff 7-14-04; paragraphs (a)(2)-(3) EXPIRED: 1-10-05; amd by #8261, eff 1-21-05; amd by #9471, INTERIM, eff 5-15-09, EXPIRED: 11-11-09

New. #9765-A, eff 8-2-10

Amended by Volume XXXIX Number 16, Filed April 18, 2019, Proposed by #12738, Effective 4/30/2019, Expires 4/30/2029.