N.H. Admin. Code § Saf-C 3309.01

Current through Register No. 36, September 5, 2024

Section Saf-C 3309.01 - Manufacturer's Data Plate

(a) The permanent manufacturer's data plate located in the vicinity of the state label shall include the following information:

(1) Name and address of manufacturer;

(2) Manufacturer's serial number;

(3) Manufacturer's plan approval designation-model number and name;

(4) Construction classification;

(5) Use and occupancy;

(6) Seismic zone;

(7) Wind velocity load;

(8) Roof live load, including ground snow load;

(9) Floor live load;

(10) Fire rating for exterior walls, if applicable;

(11) Thermal transmittance values;

(12) Date of manufacture;

(13) Destination;

(14) State label numbers; and

(15) Agency label numbers.

(b) If the shape or size of a modular building or building component is such that the data plate cannot be permanently attached, the information shall be placed in a manual crated with the component or on a tag attached to the crate in which the component is shipped. The manual or tag shall be presented to the owner upon transfer of possession.

N.H. Admin. Code § Saf-C 3309.01

#5439, eff 7-24-92; amd by #5935, eff 12-20-94; ss by #6810, INTERIM, eff 7-25-98, EXPIRES: 11-22-98; ss by #6885, eff 11-18-98; ss by #8741, INTERIM, eff 11-18-06, EXPIRED: 5-17-07

New. #9752, eff 7-9-10 (from Saf-C 3309.08 )

Amended by Volume XXXIX Number 16, Filed April 18, 2019, Proposed by #12737, Effective 3/8/2019, Expires 3/8/2029.