Current through Register No. 44, October 31, 2024
Section Saf-C 3234.04 - Tread Depth(a) A tread depth measuring gauge shall be used to measure tread depth. Readings shall be taken in the major tread groove nearest to the center of the tire at 2 points along the circumference of the tire, not closer than 15 inches.(b) If a tire has the tread design running across the tire or is a siped tire, readings shall be taken at or near the center of the tire at 2 points along the circumference of the tire, not closer than 15 inches.(c) Pursuant to RSA 266:51, a motorcycle shall be rejected if the tread depth is less than 2/32 inch at both points where tread depth measurements were made.N.H. Admin. Code § Saf-C 3234.04
(See Revision Notes at chapter heading Saf-C 3200) #8915, eff 6-22-07
Amended by Volume XXXVI Number 06, Filed February 11, 2016, Proposed by #11016, Effective 1/6/2016, Expires 1/6/2026.