N.H. Admin. Code § Env-Hw 402.06
Table 4.5 EPA Generic Industrial Process Wastes
Industry and EPA Hazardous Waste Number | Hazardous Waste | Hazard Code |
Generic: | ||
F001 | The following spent halogenated solvents used in degreasing: Tetrachloroethylene, trichloroethylene, methylene chloride, 1,1,1-trichloroethane, carbon tetrachloride, and chlorinated fluorocarbons; all spent solvent mixtures/blends used in degreasing containing, before use, a total of 10 percent or more, by volume, of one or more of the above halogenated solvents or those solvents listed in F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. | (T) |
F002 | The following spent halogenated solvents: Tetrachloroethylene, methylene chloride, trichloroethylene, 1,1,1-trichloroethane, chlorobenzene, 1,1,2-trichloro-1,2,2-trifluoroethane, ortho-dichlorobenzene, trichlorofluoromethane, and 1,1,2- trichloroethane; all spent solvent mixtures/blends containing, before use, a total of 10 percent or more, by volume, of one or more of the above halogenated solvents or those listed in F001, F004, or F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. | (T) |
F003 | The following spent non-halogenated solvents: Xylene, acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n-butyl alcohol, cyclohexanone, and methanol; all spent solvent mixtures/blends containing, before use, only the above spent non-halogenated solvents; all spent solvent mixtures/blends containing, before use, one or more of the above non-halogenated solvents, and, a total of 10 percent or more, by volume, of one or more of those solvents listed in F001, F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. | (I), subject to (b), below |
F004 | The following spent non-halogenated solvents: Cresols and cresylic acid, and nitrobenzene; all spent solvent mixtures/blends containing, before use, a total of 10 percent or more, by volume, of one or more of the above non-halogenated solvents or those solvents listed in F001, F002, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. | (T) |
F005 | The following spent non-halogenated solvents: Toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, benzene, 2-ethoxyethanol, and 2-nitropropane; all spent solvent mixtures/blends containing, before use, a total of 10 percent or more, by volume, of one or more of the above non-halogenated solvents or those solvents listed in F001, F002, or F004; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. | (I,T) |
F006 | Wastewater treatment sludges from common and precious metals electroplating, anodizing, chemical etching and milling, bright dipping, electropolishing, electrochemical machining, and cleaning and stripping when associated with these processes, except as follows: (1) Sulfuric acid anodizing of aluminum; (2) tin plating on carbon steel; (3) zinc plating (segregated basis) on carbon steel; (4) aluminum or zinc-aluminum plating on carbon steel; (5) cleaning/stripping associated with tin, zinc and aluminum plating on carbon steel; and (6) chemical etching and milling of aluminum. Wastewater treatment sludges from chemical conversion coating or electroless plating are not included in the F006 listing. | (T) |
F007 | Spent cyanide plating bath solutions from electroplating operations. | (R,T) |
F008 | Plating bath residues from the bottom of plating baths from electroplating operations where cyanides are used in the process. | (R,T) |
F009 | Spent stripping and cleaning bath solutions from electroplating operations where cyanides are used in the process. | (R,T) |
F010 | Quenching bath residues from oil baths from metal heat treating operations where cyanides are used in the process. | (R,T) |
F011 | Spent cyanide solutions from salt bath pot cleaning from metal heat treating operations. | (R,T) |
F012 | Quenching wastewater treatment sludges from metal heat treating operations where cyanides are used in the process. | (T) |
F019 | Wastewater treatment sludges from the chemical conversion coating of aluminum. Chemical conversion coating processes are coloring, chromating, phosphating, and immersion plating. The F019 listing does not include wastewater treatment sludges from zirconium phosphating in aluminum can washing when such phosphating is an exclusive conversion coating process. Subject to the definitions and requirements of 40 CFR 261.31(b)(4), wastewater treatment sludges from the manufacturing of motor vehicles using a zinc phosphating process are not included in the F019 listing at the point of generation if the wastes are not placed outside on the land prior to shipment to a landfill for disposal and are disposed of in: an out-of-state solid waste municipal or industrial landfill unit that is equipped with a single clay liner and is permitted, licensed or otherwise authorized by the state; an out-of-state landfill unit subject to, or otherwise meeting, the landfill requirements in 40 CFR 258.40, 40 CFR 264.301 or 40 CFR 265.301; or a New Hampshire landfill that is permitted to accept the waste under RSA 149-M or is regulated under Env-Hw 707 or Env-Hw 708. | (T) |
F020 | Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the production or manufacturing use, as a reactant, chemical intermediate, or component in a formulating process, of tri- or tetrachlorophenol, or of intermediates used to produce their pesticide derivatives. Wastes from the production of Hexachlorophene from highly purified 2,4,5-trichlorophenol are not included in the F020 listing. | (H) |
F021 | Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the production or manufacturing use as a reactant, chemical intermediate, or component in a formulating process, of pentachlorophenol, or of intermediates used to produce its derivatives. | (H) |
F022 | Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the production or manufacturing use as a reactant, chemical intermediate, or component in a formulating process, of tetra-, penta-, or hexachlorobenzenes under alkaline conditions. | (H) |
F023 | Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the production of materials on equipment previously used for the production or manufacturing use as a reactant, chemical intermediate, or component in a formulating process, of tri- and tetrachlorophenols. Wastes from equipment used only for the production or use of Hexachlorophene from highly purified 2,4,5-trichlorophenol are not included in the F023 listing. | (H) |
F024 | Process wastes, including but not limited to, distillation residues, heavy ends, tars, and reactor clean-out wastes, from the production of certain chlorinated aliphatic hydrocarbons by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from 1 to and including 5, with varying amounts and positions of chlorine substitution. This listing does not include wastewaters, wastewater treatment sludges, spent catalysts, and wastes listed in Env-Hw 402.06 and 402.07. | (T) |
F025 | Condensed light ends, spent filters and filter aids, and spent desiccant wastes from the production of certain chlorinated aliphatic hydrocarbons, by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from 1 to and including 5, with varying amounts and positions of chlorine substitution. | (T) |
F026 | Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the production of materials on equipment previously used for the manufacturing use, as a reactant, chemical intermediate, or component in a formulating process, of tetra-, penta-, or hexachlorobenzene under alkaline conditions. | (H) |
F027 | Discarded unused formulations containing tri-, tetra-, or pentachlorophenol or discarded unused formulations containing compounds derived from these chlorophenols. Formulations containing Hexachlorophene synthesized from prepurified 2,4,5-trichlorophenol as the sole component are not included in the F027 listing. | (H) |
F028 | Residues resulting from the incineration or thermal treatment of soil contaminated with EPA hazardous waste numbers F020, F021, F022, F023, F026, and F027. | (T) |
F032 | Except as provided in 40 CFR 261.35, wastewaters, process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that currently use or have previously used chlorophenolic formulations, except wastewaters that have not come into contact with process contaminants, and except potentially cross-contaminated wastes that either have had the F032 EPA hazardous waste number deleted in accordance with 40 CFR 261.35, or that are otherwise currently regulated as F034 or F035 hazardous wastes, provided the generator does not resume or initiate use of chlorophenolic formulations. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol. | (T) |
F034 | Wastewaters, process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use creosote formulations, except wastewaters that have not come into contact with process contaminants. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol. | (T) |
F035 | Wastewaters, process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use inorganic preservatives containing arsenic or chromium, except wastewaters that have not come into contact with process contaminants. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol. | (T) |
F037 | Petroleum refinery primary oil/water/solids separation sludge as specified in 40 CFR 261.31(a), (b)(1), (b)(2) and (b)(3)(i). | (T) |
F038 | Petroleum refinery secondary (emulsified) oil/water/solids separation sludge as specified in 40 CFR 261.31(a), (b)(1), (b)(2) and (b)(3)(ii). | (T) |
F039 | Leachate resulting from the land disposal of more than one restricted waste classified as hazardous under Env-Hw 400. Leachate resulting from the disposal of one or more of the following EPA hazardous wastes and no other hazardous wastes retains its EPA hazardous waste numbers and is not included in the F039 listing: F020, F021, F022, F026, F027, and/or F028. | (T) |
Table 4.6 New Hampshire Generic Industrial Process Wastes
NH Hazardous Waste Number | Hazardous Waste | Hazard Code |
NH01 | Used Oil | (T) |
NH51 to NH74 | Reserved |
N.H. Admin. Code § Env-Hw 402.06
#5053, eff 1-24-91; ss by #5886, eff 8-26-94; amd by #6384-B, eff 11-26-96; amd by #7207-B, eff 2-26-00; ss by #7333, eff 8-1-00; ss by #9215, INTERIM, eff 8-1-08; (See Revision Note at chapter heading for Env-Hw 400) ss by #9367, eff 1-28-09