Section Env-Hw 401.06 - Test Methods for Analyzing Hazardous Wastes Test methods for analyzing hazardous wastes shall be as specified in the following publications, as incorporated by reference in 40 CFR 260.11 and available as noted in Appendix B:
(a) "ASTM Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester," ASTM Standard D-3278-78;(b) "ASTM Standard Test Methods for Flash Point by Pensky-Martens Closed Tester," ASTM Standard D-93-79 or D-93-80;(c) "ASTM Standard Method for Analysis of Reformed Gas by Gas Chromatography," ASTM Standard D-1946-82;(d) "ASTM Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)," ASTM Standard D-2382-83;(e) "ASTM Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis," ASTM Standard E-169-87;(f) "ASTM Standard Practices for General Techniques of Infrared Quantitative Analysis," ASTM Standard E 168-88;(g) "ASTM Standard Practice for Packed Column Gas Chromatography," ASTM Standard E-260-85;(h) "ASTM Standard Test Method for Aromatics in Light Naphthas and Aviation Gasolines by Gas Chromatography," ASTM Standard D-2267-88;(i) "APTI Course 415: Control of Gaseous Emissions," EPA publication EPA-450/2-81-005, December 1981;(j) "Flammable and Combustible Liquids Code," NFPA 30, 1977 or 1981;(k) "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods," EPA publication SW-846, as specified in Env-Hw 104; (l) "Screening Procedures for Estimating the Air Quality Impact of Stationary Sources, Revised," October 1992, EPA Publication No. EPA-450/R-92-019;(m) "ASTM Standard Test Methods for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals," ASTM Standard E926-88, Test Method C-Bomb, Acid Digestion Method;(n) API Publication 2517, "Evaporative Loss from External Floating-Roof Tanks," Third Edition, February 1989; and(o) "ASTM Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope," ASTM Standard D 2879-92.N.H. Admin. Code § Env-Hw 401.06
#7207-B, eff 2-26-00; ss by #7333, eff 8-1-00; ss by #9215, INTERIM, eff 8-1-08; (See Revision Note at chapter heading for Env-Hw 400) ss by #9367, eff 1-28-09
Amended by Volume XXXVII Number 32, Filed August 10, 2017, Proposed by #12346, Effective 8/14/2017, Expires 8/14/2027.Amended by Volume XXXIX Number 50, Filed December 12, 2019, Proposed by #12922, Effective 11/23/2019, Expires 11/23/2029.