Md. Code Regs. 26.20.28.02

Current through Register Vol. 51, No. 19, September 20, 2024

Section 26.20.28.02 - Method for Backfilling and Grading

A. Except as specifically exempted in this chapter, all disturbed areas shall be returned to their approximate original contour. All spoil shall be transported, backfilled, compacted (where advisable to ensure stability or to prevent leaching) and graded to eliminate all highwalls, spoil piles, and depressions.

B. Backfilled material shall be placed to minimize erosion and water pollution both on and off the site, to minimize adverse effects on ground water, and to support the approved postmining land use.

C. The postmining graded slopes need not be of uniform slope.

D. Cut-and-fill terraces may be used only in those situations expressly identified in Regulation .03 of this chapter.

Md. Code Regs. 26.20.28.02

Regulations .02 were previously codified as COMAR 08.13.09.34 a A_F, respectively. Recodification occurred in April, 1993. For a history of these regulations before April, 1993, see "Administrative History of COMAR 08.13.09 before April, 1993" which follows COMAR 26.20.01.