Md. Code Regs. 26.11.32.07

Current through Register Vol. 51, No. 22, November 1, 2024

Section 26.11.32.07 - Standards - Requirements for Floor Wax Strippers

A person may not sell, supply, offer for sale, or manufacture, for use in the State, a floor wax stripper unless the following requirements are met:

A. The label of each non-aerosol floor wax stripper shall specify a dilution ratio for light or medium build-up of polish that results in an as-used VOC concentration of 3 percent by weight or less;

B. If a non-aerosol floor wax stripper is intended to be used for removal of heavy build-up of polish, the label of that floor wax stripper shall specify a dilution ratio for heavy build-up of polish that results in an as-used VOC concentration of 12 percent by weight or less; and

C. The terms "light build-up", "medium build-up", or "heavy build-up" are not specifically required on the product label if comparable terminology is used.

Md. Code Regs. 26.11.32.07