(a) In addition to the other requirements of this subpart, your plans for platform design, analysis, fabrication, installation, use, maintenance, inspection and assessment must, as appropriate, conform to: (1) ACI Standard 318-95, Building Code Requirements for Reinforced Concrete (ACI 318-95) and Commentary (ACI 318R-95) (incorporated by reference at § 250.198 ); (2) ACI 357R-84, Guide for the Design and Construction of Fixed Offshore Concrete Structures, 1984; reapproved 1997 (incorporated by reference
Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51 . All incorporated material is available for inspection at the Houston BSEE office at 1919 Smith Street Suite 14042, Houston, Texas 77002 and is available from the sources indicated in this section. It is also available for inspection at the National Archives and Records Administration (NARA). To make an appointment to inspect incorporated
(a) All SSVs, BSDVs, USVs, and GLSDVs and their actuators must meet all of the specifications contained in ANSI/API Spec. 6A and API Spec. 6AV1 (both incorporated by reference in § 250.198 ). (b) All SSSVs and their actuators must meet all of the specifications and recommended practices of ANSI/API Spec. 14A and ANSI/API RP 14B, including all annexes (both incorporated by reference as specified in § 250.198 ). Subsurface-controlled SSSVs are not allowed on subsea wells. (c) Requirements derived from
(a)SPPE equipment. You must install only safety and pollution prevention equipment (SPPE) considered certified under paragraph (b) of this section or accepted under paragraph (c) of this section. BSEE considers the following equipment to be types of SPPE: (1) Surface safety valves (SSV) and actuators, including those installed on injection wells capable of natural flow; (2) Boarding shutdown valves (BSDV) and their actuators. For subsea wells, the BSDV is the surface equivalent of an SSV on a surface
The board shall receive, evaluate and process all applications for licensure as a professional engineer received from individuals who assert through the application process that they meet the minimum requirements of § 1001.302 of the Act. The board shall deny a license to any applicant found not to have met all requirements of the Act and board rules. (1) Standard License. Unless requested by the applicant or license holder, all licenses issued by the board shall be considered standard licenses.
(a) You must compile, retain, and make available to BSEE representatives for the functional life of all platforms: (1) The as-built drawings; (2) The design assumptions and analyses; (3) A summary of the fabrication and installation nondestructive examination records; (4) The inspection results from the inspections required by § 250.919 of this subpart; and (5) Records of repairs not covered in the inspection report submitted under § 250.919(b) . (b) You must record and retain the original material
(a) You must design, install, use, maintain, and test production safety equipment in a manner to ensure the safety and protection of the human, marine, and coastal environments. For production safety systems operated in subfreezing climates, you must use equipment and procedures that account for floating ice, icing, and other extreme environmental conditions that may occur in the area. Before you commence production on a new production facility: (1) BSEE must approve your production safety system
The Platform Approval Program requires that you submit the information, documents, and fee listed in the following table for your proposed project. In lieu of submitting the paper copies specified in the table, you may submit your application electronically in accordance with 30 CFR 250.186(a)(3) . Required submittal Required contents Other requirements (a) Application cover letter Proposed structure designation, lease number, area, name, and block number, and the type of facility your facility (e
In accordance with Subsection 58-22-302(3)(d), an applicant for licensure as a professional land surveyor shall verify completion of one of the following land surveying programs affiliated with an institution that is recognized by the Council for Higher Education Accreditation (CHEA), and approved by the Division in collaboration with the Board: (1) an associates in applied science degree in land surveying or geomatics; (2) a bachelors, masters or doctorate degree in land surveying or geomatics;
(a) You must design, fabricate, install, use, maintain, inspect, and assess all platforms and related structures on the Outer Continental Shelf (OCS) so as to ensure their structural integrity for the safe conduct of drilling, workover, and production operations. In doing this, you must consider the specific environmental conditions at the platform location. (b) You must also submit an application under § 250.905 of this subpart and obtain the approval of the Regional Supervisor before performing