18 Va. Admin. Code § 10-20-760
Current through Register Vol. 40, No. 19, May 6, 2024
Section 18VAC10-20-760 - Use of sealA. Affixing of a professional seal, signature, and date shall indicate that the professional has exercised direct control and personal supervision over the work to which it is affixed. Affixing of the seal, signature, and date also indicates the professional's acceptance of responsibility for the work shown thereon. 1. No professional shall affix a seal, signature, and date or certification to plans, plats, documents, drawings, or other works constituting the practice of the professions regulated that has been prepared by an unlicensed or uncertified person unless such works were performed under the direct control and personal supervision of the professional while the unlicensed or uncertified person was an employee of the same firm as the professional or was under written contract to the same firm that employs the professional.2. If the original professional of record is no longer able to seal, sign, and date completed professional work, such work may be sealed, signed, and dated by another qualified professional pursuant to the standards established in 18VAC10-20-740 G 1.B. Documents to be sealed.1. All final documents, including cover sheet of plans, plats, documents, drawings, technical reports, and specifications, and each sheet of plans or plats, or drawings prepared by the professional, or someone under his direct control and personal supervision, shall be sealed, signed, and dated by the professional. All final documents shall also bear the professional's name or firm name, address, and project name.2. For projects involving multiple professional services in the same project, each professional shall seal, sign, and date the final documents for the work component that he completed or that was completed under his direct control and personal supervision. The professional responsible for the compilation of the project shall seal, sign, and date the cover sheet of the aggregate collection of final documents for the project.C. An electronic seal, signature, and date are permitted to be used in lieu of an original seal, signature, and date when the following criteria, and all other requirements of this section, are met: 1. It is a unique identification of the professional;3. It is under the professional's direct control.D. Incomplete plans, plats, documents, and drawings, whether advance or preliminary copies, shall be so identified on the plans, plats, documents, or drawings and need not be sealed, signed, or dated. Advance or preliminary copies of incomplete plans, plats, documents, and drawings, must be clearly identified as not complete but need not be sealed, signed, or dated.E. All work performed by a professional who is licensed or certified by this board, including work that is exempt from licensure pursuant to § 54.1-402 of the Code of Virginia, shall be sealed, signed, and dated pursuant to subsection B of this section.F. The original seal shall conform in detail and size to the design illustrated in this subsection and shall be two inches in diameter. The designs illustrated may not be shown to scale: 18 Va. Admin. Code § 10-20-760
Derived from VR130-01-2 §12.8, eff. October 18, 1985; amended, Virginia Register Volume 4, Issue 8, eff. March 1, 1988; Volume 6, Issue 20, eff. September 1, 1990; Volume 7, Issue 14, eff. May 8, 1991; Volume 8, Issue 7, eff. February 1, 1992; Volume 10, Issue 15, eff. May 19, 1994; Volume 13, Issue 23, eff. October 1, 1997; Volume 16, Issue 3, eff. December 1, 1999; Volume 18, Issue 7, eff. March 1, 2002; Volume 23, Issue 1, eff. February 1, 2007; Volume 25, Issue 3, eff. December 1, 2008; Volume 26, Issue 4, eff. July 1, 2010; Amended, Virginia Register Volume 32, Issue 06, eff. 1/1/2016; Amended, Virginia Register Volume 37, Issue 24, eff. 9/2/2021.Statutory Authority: §§ 54.1-201 and 54.1-404 of the Code of Virginia.