N.J. Admin. Code § 16:62-3.3

Current through Register Vol. 56, No. 9, May 6, 2024

Section 16:62-3.3 - Delineation of the RUNWAY SUBZONE

(a) The RUNWAY SUBZONE of an Airport Safety Zone shall consist of a rectangle having the same centerline and length as the runway, unless a shorter length is necessitated by limited property ownership at the airport.

(b) The width of the RUNWAY SUBZONE shall be 2350 feet.

(c) The exact length of the RUNWAY SUBZONE shall be determined by one of the two following methods.

1. For most airports, the length of the RUNWAY SUBZONE will be the same as the physical length of the runway.

2. If the physical end of a runway is closer than 200 feet from the property or easement line of the airport, as measured along the runway's extended centerline, then the end of the RUNWAY SUBZONE shall be defined by a line drawn perpendicular to the runway centerline at a point 200 feet inside of the airport property or easement line. In this case, a portion of the runway will extend beyond the bounds of the RUNWAY SUBZONE.

(d) The methodology used to delineate the RUNWAY SUBZONE of an Airport Safety Zone is illustrated in Figure 1.

N.J. Admin. Code § 16:62-3.3

Amended by R.1995 d.76, effective 2/6/1995.
See: 26 New Jersey Register 4502(a), 27 New Jersey Register 525(a).