Subpart J - SPECIFICATIONS FOR CONTAINERS FOR MOTOR VEHICLE TRANSPORTATION
- Section 178.318-1 - Scope
- Section 178.318-2 - Container
- Section 178.318-3 - Marking
- Section 178.318 - Specification MC 201; container for detonators and percussion caps
- Section 178.320 - General requirements applicable to all DOT specification cargo tank motor vehicles
- Section 178.337-1 - General requirements
- Section 178.337-2 - Material
- Section 178.337-3 - Structural integrity
- Section 178.337-4 - Joints
- Section 178.337-5 - Bulkheads, baffles and ring stiffeners
- Section 178.337-6 - Closure for manhole
- Section 178.337-7 - Overturn protection
- Section 178.337-8 - Openings, inlets, and outlets
- Section 178.337-9 - Pressure relief devices, piping, valves, hoses, and fittings
- Section 178.337-10 - Accident damage protection
- Section 178.337-11 - Emergency discharge control
- Section 178.337-12 - Reserved
- Section 178.337-13 - Supporting and anchoring
- Section 178.337-14 - Gauging devices
- Section 178.337-15 - Pumps and compressors
- Section 178.337-16 - Testing
- Section 178.337-17 - Marking
- Section 178.337-18 - Certification
- Section 178.337 - Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter
- Section 178.338-1 - General requirements
- Section 178.338-2 - Material
- Section 178.338-3 - Structural integrity
- Section 178.338-4 - Joints
- Section 178.338-5 - Stiffening rings
- Section 178.338-6 - Manholes
- Section 178.338-7 - Openings
- Section 178.338-8 - Pressure relief devices, piping, valves, and fittings
- Section 178.338-9 - Holding time
- Section 178.338-10 - Accident damage protection
- Section 178.338-11 - Discharge control devices
- Section 178.338-12 - Shear section
- Section 178.338-13 - Supporting and anchoring
- Section 178.338-14 - Gauging devices
- Section 178.338-15 - Cleanliness
- Section 178.338-16 - Inspection and testing
- Section 178.338-17 - Pumps and compressors
- Section 178.338-18 - Marking
- Section 178.338-19 - Certification
- Section 178.338 - Specification MC-338; insulated cargo tank motor vehicle
- Section 178.340-178.343 - Reserved
- Section 178.345-1 - General requirements
- Section 178.345-2 - Material and material thickness
- Section 178.345-3 - Structural integrity
- Section 178.345-4 - Joints
- Section 178.345-5 - Manhole assemblies
- Section 178.345-6 - Supports and anchoring
- Section 178.345-7 - Circumferential reinforcements
- Section 178.345-8 - Accident damage protection
- Section 178.345-9 - Pumps, piping, hoses and connections
- Section 178.345-10 - Pressure relief
- Section 178.345-11 - Tank outlets
- Section 178.345-12 - Gauging devices
- Section 178.345-13 - Pressure and leakage tests
- Section 178.345-14 - Marking
- Section 178.345-15 - Certification
- Section 178.345 - General design and construction requirements applicable to Specification DOT 406 (Section 178.346), DOT 407 (Section 178.347), and DOT 412 (Section 178.348) cargo tank motor vehicles
- Section 178.346-1 - General requirements
- Section 178.346-2 - Material and thickness of material
- Section 178.346-3 - Pressure relief
- Section 178.346-4 - Outlets
- Section 178.346-5 - Pressure and leakage tests
- Section 178.346 - Specification DOT 406; cargo tank motor vehicle
- Section 178.347-1 - General requirements
- Section 178.347-2 - Material and thickness of material
- Section 178.347-3 - Manhole assemblies
- Section 178.347-4 - Pressure relief
- Section 178.347-5 - Pressure and leakage test
- Section 178.347 - Specification DOT 407; cargo tank motor vehicle
- Section 178.348-1 - General requirements
- Section 178.348-2 - Material and thickness of material
- Section 178.348-3 - Pumps, piping, hoses and connections
- Section 178.348-4 - Pressure relief
- Section 178.348-5 - Pressure and leakage test
- Section 178.348 - Specification DOT 412; cargo tank motor vehicle