Notice of Receipt of Petition for Decision That Nonconforming Model Year 2005 Chevrolet Corvette Passenger Cars Are Eligible for Importation

AGENCY:

National Highway Traffic Safety Administration (NHTSA), Department of Transportation (DOT).

ACTION:

Receipt of petition.

SUMMARY:

This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that certain model year (MY) 2005 Chevrolet Corvette passenger cars (PCs) that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards (FMVSS) are eligible for importation into the United States because they are substantially similar to vehicles that were originally manufactured for sale in the United States and that were certified by their manufacturer as complying with the safety standards (the U.S.-certified version of the MY 2005 Chevrolet Corvette PCs) and are capable of being readily altered to conform to the standards.

DATES:

The closing date for comments on the petition is December 31, 2018.

ADDRESSES:

Interested persons are invited to submit written data, views, and arguments on this petition. Comments must refer to the docket number cited in the title of this notice and must be submitted by any of the following methods:

• Mail: Send comments by mail addressed to the U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
• Hand Delivery: Deliver comments by hand to the U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590. The Docket Section is open on weekdays from 10 a.m. to 5 p.m. except for Federal Holidays.
• Electronically: Submit comments electronically by logging onto the Federal Docket Management System (FDMS) website at https://www.regulations.gov/. Follow the online instructions for submitting comments.
• Comments may also be faxed to (202) 493-2251.

Comments must be written in the English language, and be no greater than 15 pages in length, although there is no limit to the length of necessary attachments to the comments. If comments are submitted in hard copy form, please ensure that two copies are provided. If you wish to receive confirmation that comments you have submitted by mail were received, please enclose a stamped, self-addressed postcard with the comments. Note that all comments received will be posted without change to https://www.regulations.gov,, including any personal information provided.

All comments, background documentation, and supporting materials submitted to the docket may be viewed by anyone at the address and times given above. The documents may also be viewed on the internet at https://www.regulations.gov by following the online instructions for accessing the dockets. The docket ID number for this petition is shown in the heading of this notice.

DOT's complete Privacy Act Statement is available for review in a Federal Register notice published on April 11, 2000, (65 FR 19477-78).

FOR FURTHER INFORMATION CONTACT:

Neil Thurgood, Office of Vehicle Safety Compliance, NHTSA, telephone (202) 366-0712.

SUPPLEMENTARY INFORMATION:

I. History

Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not originally manufactured to conform to all applicable FMVSS (49 CFR 571) shall be refused admission into the United States unless NHTSA has decided that the motor vehicle is substantially similar to a motor vehicle originally manufactured for importation into and sale in the United States, certified under 49 U.S.C. 30115, and of the same model year as the model of the motor vehicle to be compared, and is capable of being readily altered to conform to all applicable FMVSS.

Petitions for eligibility decisions may be submitted by either manufacturers or importers who have registered with NHTSA pursuant to 49 CFR part 592. As specified in 49 CFR 593.7, Processing of Petitions, NHTSA publishes notice in the Federal Register of each petition that it receives, and affords interested persons an opportunity to comment on the petition. At the close of the comment period, NHTSA decides, on the basis of the petition and any comments that it has received, whether the vehicle is eligible for importation. The agency then publishes this decision in the Federal Register.

II. Summary of Petition

Wallace Environmental Testing Laboratories (WETL), of Houston, Texas (Registered Importer R-90-005) has petitioned NHTSA to decide whether nonconforming MY 2005 Chevrolet Corvette PCs are eligible for importation into the United States. The vehicles that WETL believes are substantially similar are MY 2005 Chevrolet Corvette PCs, manufactured for sale in the United States and certified by their manufacturer as conforming to all applicable FMVSS.

The petitioner submitted information with its petition intended to demonstrate that the subject non-U.S.-certified vehicles as originally manufactured, conform to many applicable FMVSS in the same manner as their U.S.-certified counterparts, or are capable of being readily altered to conform to those standards.

Specifically, the petitioner claims that the non-U.S.-certified MY 2005 Chevrolet Corvette PCs, as originally manufactured, conforms to: Standard Nos. 102 Transmission Shift Position Sequence, Starter Interlock, and Transmission Braking Effect, 103 Windshield Defrosting and Defogging Systems, 104 Windshield Wiping and Washing Systems, 106 Brake Hoses, 108 Lamps, Reflective Devices and Associated Equipment, 110 Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 Kilograms (10,000 Pounds) or Less, 111 Rearview Mirrors, 113 Hood Latch System, 114 Theft Protection, 116 Motor Vehicle Brake Fluids, 118 Power-Operated Window, Partition, and Roof Panel Systems, 124 Accelerator Control Systems, 135 Light Vehicle Brake Systems, 138 Tire Pressure Monitoring Systems, 201 Occupant Protection in Interior Impact, 202a Head Restraints; Mandatory Applicability Begins on September 1, 2008, 204 Steering Control Rearward Displacement, 205 Glazing Materials, 206 Door Locks and Door Retention Components, 207 Seating Systems, 209 Seat Belt Assemblies, 210 Seat Belt Assembly Anchorages, 212 Windshield Mounting, 214 Side Impact Protection, 216 Roof Crush Resistance, 219 Windshield Zone Intrusion, 225 Child Restraint Anchorage Systems, 301 Fuel System Integrity, 302 Flammability of Interior Materials and 401 Interior Trunk Release.

The petitioner also contends that the subject non-U.S.-certified passenger cars are capable of being readily altered to meet the following standards in the manners indicated:

Standard No. 101 Controls and Displays: The brake warning telltale must be modified to show the word “BRAKE” when activated.

Standard No. 208 Occupant Crash Protection: Inspection to ascertain if the software and firmware installed in the vehicle are the same as the most up-to-date versions installed in the U.S.-conforming version of the vehicle. Replacement of any software or firmware found not to be the most recent versions. Replacement of sun visors with U.S.-model components to meet the labeling requirements of FMVSS No. 208.

The petitioner additionally states that a vehicle identification plate must be affixed to the vehicle near the left windshield pillar to meet the requirements of 49 CFR part 565.

III. Comments

All comments and supporting materials received before the close of business on the closing date indicated above will be filed in the docket and considered. Comments filed after the closing date will also be considered to the fullest extent possible and available for examination in the docket at the above addresses.

Once the petition is granted or denied, notice of the decision will be published in the Federal Register pursuant to the authority indicated at the end of this notice.

This notice of receipt of the subject petition does not represent any agency decision or other exercise of judgment concerning the merits of the petition. Notice of final action on the petition will be published in the Federal Register pursuant to the authority indicated below.

Authority: 49 U.S.C. 30141(a)(1)(A), (a)(1)(B), and (b)(1); 49 CFR 593.7; delegation of authority at 49 CFR 1.95 and 501.8.