Notice of Application Ready for Environmental Analysis and Soliciting Comments, Recommendations, Terms and Conditions, and Prescriptions: Erie Boulevard Hydropower, L.P.

Download PDF
Federal RegisterNov 26, 2018
83 Fed. Reg. 60418 (Nov. 26, 2018)

Take notice that the following hydroelectric application has been filed with the Commission and is available for public inspection.

a. Type of Application: New Major License.

b. Project No.: 2837-033.

c. Date filed: March 29, 2018.

d. Applicant: Erie Boulevard Hydropower, L.P. (Erie).

e. Name of Project: Granby Hydroelectric Project.

f. Location: On the Oswego River in the town of Fulton in Oswego County, New York. The project does not affect federal lands.

g. Filed Pursuant to: Federal Power Act, 16 U.S.C. 791 (a)-825(r).

h. Applicant Contact: Steven P. Murphy, Director, U.S. Licensing, Erie Boulevard Hydropower, L.P., 33 West 1st Street South, Fulton, NY 13069; (315) 598-6130.

i. FERC Contact: Allyson Conner, (202) 502-6082 or allyson.conner@ferc.gov.

j. Deadline for filing comments, recommendations, terms and conditions, and prescriptions: 60 days from the issuance date of this notice; reply comments are due 105 days from the issuance date of this notice.

The Commission strongly encourages electronic filing. Please file comments, recommendations, terms and conditions, and prescriptions using the Commission's eFiling system at http://www.ferc.gov/docs-filing/efiling.asp. Commenters can submit brief comments up to 6,000 characters, without prior registration, using the eComment system at http://www.ferc.gov/docs-filing/ecomment.asp. You must include your name and contact information at the end of your comments. For assistance, please contact FERC Online Support at FERCOnlineSupport@ferc.gov, (866) 208-3676 (toll free), or (202) 502-8659 (TTY). In lieu of electronic filing, please send a paper copy to: Secretary, Federal Energy Regulatory Commission, 888 First Street NE, Washington, DC 20426. The first page of any filing should include docket number P-2837-033.

The Commission's Rules of Practice require all intervenors filing documents with the Commission to serve a copy of that document on each person on the official service list for the project. Further, if an intervenor files comments or documents with the Commission relating to the merits of an issue that may affect the responsibilities of a particular resource agency, they must also serve a copy of the document on that resource agency.

k. This application has been accepted, and is ready for environmental analysis at this time.

l. The existing Granby Hydroelectric Project (Granby Project) consists of: (1) An 88-foot-wide reinforced concrete intake structure that includes two bays containing trashracks and fixed-roller, vertical-lift type gates; (2) a 17-foot-wide sluice opening adjacent to the intake structure; (3) a 112-foot-long, 88-foot-wide powerhouse containing two 5.04-megawatt (MW) turbine-generator units, with a total capacity of 10.08 MW; (4) a 3,000-foot-long, 100-foot-wide tailrace; (5) two 4.16-kilovolt, 120-foot-long underground generator leads; (6) a 60-foot-long by 48-foot-wide electrical switchyard; and (7) appurtenant facilities.

The Granby Project is operated in a modified run-of-river mode. The Granby Project and the Fulton Development at Erie's Oswego River Hydroelectric Project (FERC Project No. 2474) are located at opposite ends of the same dam and share a single bypassed reach and reservoir. The flow and impoundment elevation requirements in the Oswego Project license, which were based on a 2004 Offer of Settlement, affect the Granby Project. The average annual generation at the Granby Project is estimated to be 44,181 megawatt-hours.

109 FERC ¶ 62, 141 (2004).

m. A copy of the application is available for review at the Commission in the Public Reference Room or may be viewed on the Commission's website at http://www.ferc.gov using the “eLibrary” link. Enter the docket number excluding the last three digits in the docket number field to access the document. For assistance, contact FERC Online Support. A copy is also available for inspection and reproduction at the address in item h above.

All filings must (1) bear in all capital letters the title “COMMENTS,” “REPLY COMMENTS,” “RECOMMENDATIONS,” “TERMS AND CONDITIONS,” or “PRESCRIPTIONS;” (2) set forth in the heading the name of the applicant and the project number of the application to which the filing responds; (3) furnish the name, address, and telephone number of the person submitting the filing; and (4) otherwise comply with the requirements of 18 CFR 385.2001 through 385.2005. All comments, recommendations, terms and conditions, or prescriptions must set forth their evidentiary basis and otherwise comply with the requirements of 18 CFR 4.34(b). Agencies may obtain copies of the application directly from the applicant. Each filing must be accompanied by proof of service on all persons listed on the service list prepared by the Commission in this proceeding, in accordance with 18 CFR 4.34(b) and 385.2010.

You may also register online at http://www.ferc.gov/docs-filing/esubscription.asp to be notified via email of new filings and issuances related to this or other pending projects. For assistance, contact FERC Online Support.

n. A license applicant must file no later than 60 days following the date of issuance of this notice: (1) A copy of the water quality certification; (2) a copy of the request for certification, including proof of the date on which the certifying agency received the request; or (3) evidence of waiver of water quality certification.

o. Procedural schedule: The application will be processed according to the following schedule. Revisions to the schedule will be made as appropriate.

Milestone Target date
Deadline for Filing Comments, Recommendations and Agency Terms and Conditions/Prescriptions January 2019.
Deadline for Filing Reply Comments March 2019.
Commission issues EA July 2019.
Comments on EA Due August 2019.

Dated: November 16, 2018.

Kimberly D. Bose,

Secretary.

[FR Doc. 2018-25580 Filed 11-23-18; 8:45 am]

BILLING CODE 6717-01-P