From Casetext: Smarter Legal Research

Burton v. L. O. Smith Foundry Products Co.

United States Court of Appeals, Seventh Circuit
Jan 28, 1976
529 F.2d 108 (7th Cir. 1976)

Summary

holding that because the defendant had no control over the machine being used or the surrounding work space, the plaintiff's employer would have to provide the warnings

Summary of this case from Ramsey v. Ga. S. Univ. Advanced Dev. Ctr.

Opinion

No. 74-2044.

Argued November 4, 1975.

Decided January 28, 1976.

John F. Vargo, Indianapolis, Ind., for plaintiff-appellant.

Robert J. Oliver, Rockford, Ill., Philip F. Boberschmidt, Indianapolis, Ind., for defendant-appellee.

Appeal from the United States District Court for the Southern District of Indiana.

Before STEVENS, Circuit Justice, RIVES, Senior Circuit Judge, and TONE, Circuit Judge.

Mr. Justice Stevens participated initially as Circuit Judge, and on and after December 19, 1975, as Circuit Justice.

Senior Circuit Judge Richard T. Rives of the Fifth Circuit is sitting by designation.


This diversity case was brought by the administratrix of the estate of Robert Burton for damages resulting from an accident that caused Burton's death. The original defendant was the Osborn Manufacturing Company, but the plaintiff later added two counts directed solely against the appellee, L. O. Smith Foundry Products ("Smith"). The two added counts were based on breach of warranty and strict liability in tort; plaintiff acknowledge the two to be equivalent under Indiana law. The District Court granted summary judgment in favor of Smith on both counts, and made the direction and determination necessary to appealability under Fed.R.Civ.P. 54(b). We affirm.

The following facts are undisputed:

Burton was employed at the Indianapolis, Indiana plant of International Harvester Company, where he had worked since 1955. The accident occurred while he was participating in the repair of a molding machine, which forms molds by applying sand to metal patterns. In the operation of the machine a "parting" compound, consisting of a highly flammable liquid, is dispensed under pressure by the machine for the purpose of a preventing the sand from sticking to the metal patterns.

During the repairs, another employee attempted to cut through a bolt on the machine with an acetylene torch. The flame severed a hose containing the pressurized parting compound, which escaped and ignited, causing fatal burns to Burton, who was standing nearby.

Smith had no part in the design or construction of the machine, which was manufactured by the defendant Osborn Manufacturing Company. Smith did, however, supply the parting concentrate which was the active ingredient of the parting compound. The concentrate contained a small amount of kerosene, but additional kerosene was needed to thin the material so it could be sprayed evenly on the metal patterns. Accordingly, International Harvester, pursuant to Smith's recommendation, mixed the concentrate with an equal part of kerosene to form the parting compound.

Adding kerosene increased volatility. Vapor from the parting concentrate, before it was mixed with kerosene, would ignite at 305 ° F. After the kerosene was added, vapor from the mixture would ignite at 190 ° F.

International Harvester had used Smith's product or a closely related product for some 30 years. Before the accident, Smith had never warned Harvester or its employees of the volatile nature of the product, nor had Smith recommended the use of the less flammable or "non-flammable" substitutes that were available. After the accident Harvester changed to a less volatile parting agent at Smith's suggestion and also posted signs identifying the hose carrying the parting agent and warned maintenance personnel of the danger of rupturing the hose.

The District Court found that it was common knowledge among the maintenance employees, including Burton, that a flammable liquid was used in the molding machine. Plaintiff contends there is a genuine issue as to whether such knowledge existed, but we need not consider this contention because, as we understand Indiana law, that issue is irrelevant.

The District Court based its summary judgment on several alternate grounds, including lack of defect, misuse, assumption of risk, and proximate cause. We find the first ground determinative.

The doctrine of strict liability, as set forth in section 402A of the Restatement of Torts (Second) has been adopted as the law in Indiana. Ayr-Way Stores, Inc. v. Chitwood, Ind., 300 N.E.2d 335 (1973); Perfection Paint v. Konduris, 147 Ind. App. 106, 258 N.E.2d 681 (1970); Cornette v. Searjeant Metal Products, Inc., 147 Ind. App. 46, 258 N.E.2d 652 (1970). Section 402A imposes liability upon "[o]ne who sells any product in a defective condition unreasonably dangerous to the user."

At least three types of unreasonably dangerous defects may exist under section 402A. A product may be defective because of manufacturing flaws, defective design, or failure or supply complete information about the product's dangers. Keeton, Products Liability, 50 F.R.D. 338 (1970). It is not claimed that the product sold by Smith was defectively manufactured. The plaintiff argues vigorously, however, that Smith failed to give necessary warnings. There is also some suggestion in the plaintiff's brief that the product was defectively designed because less flammable substitutes were available.

We consider first Smith's failure to warn. Under Indiana law, "it is well established that a product, although virtually faultless in design, material, and workmanship, may nevertheless be deemed defective . . . where the manufacturer fails to discharge a duty to warn or instruct with respect to potential dangers in the use of the product" Nissen Trampoline Co. v. Terre Haute First National Bank, Ind. App., 332 N.E.2d 820, 825 (1975). If this duty is breached and, as a result, a user of the product is injured, the user has a right of action against the manufacturer. The user need not be one of the persons the manufacturer had the duty to warn, if the breach of the duty to warn is a proximate cause of the injury. The question here is whether Smith had such a duty. If a duty existed, it was to warn the International Harvester employees who were responsible for receiving the parting concentrate, mixing it with kerosene, and using it, that the final mixture was highly flammable. Since Smith itself had no control over the molding machine or the surrounding work space, it was International Harvester, through these personnel, who would have to post warnings or take other precautions.

A duty to warn exists only when those to whom the warning would go can reasonably be assumed to be ignorant of the facts which a warning would communicate. If it is unreasonable to assume they are ignorant of those facts, there is no duty to warn. As an Indiana court said in Nissen Trampoline Co. v. Terre Haute First National Bank, supra, Ind. App., 332 N.E.2d at 825, "where the danger or potentiality of danger is known or should be known to the user, the duty [to warn] does not attach." The Indiana court cited in support of this statement Posey v. Clark Equipment Co., 409 F.2d 560 (7th Cir. 1969), cert. denied, 396 U.S. 940, 90 S.Ct. 374, 24 L.Ed.2d 242, in which this court applied 402A, as embodied in Indiana law, and held that there was no duty to warn because those who would have received the warning would normally realize the danger without the warning. As Professor Prosser states, there is no duty to warn that "a knife or an ax will cut, a match will take fire, dynamite will explode, or a hammer may mash a finger." W. Prosser, Handbook of the Law of Torts 649 (4th ed. 1971). See also Dudley Sports Co. v. Schmitt, 151 Ind. App. 217, 226, 279 N.E.2d 266, 275 (1972). Although the statements in Prosser and the Dudley case relate to negligence, strict liability adds little to the duty to warn except to make a seller's knowledge of the danger irrelevant. Prosser, supra, at 659 n. 73; see also Posey v. Clark Equipment Co., supra, 409 F.2d at 563-564 (referring to section 388 of the Restatement and comment k there to in determining the contours of the duty to warn under section 402A).

The crucial fact in the case at bar, in our view, is that Smith's product was mixed before use with an equal amount of kerosene. Because it can reasonably be expected that any user of kerosene will know it is flammable, neither Smith nor the supplier of the kerosene had any duty to warn of that fact. For the same reason, Smith had no duty to warn users that its product did not have the effect of rendering kerosene flame-proof; no one would have reasonably expected the product to have that effect.

Of course, an "obviously dangerous" product is nonetheless dangerous, especially to employees who are unaware that they are working in proximity to it. But it was not the duty of Smith to remind International Harvester of this fact, or of the obvious precautions to be taken. Smith's duty was only to make know, to those International Harvester employees to whom it had access, properties of its product that were dangerous but nonobvious. It did not breach that duty.

For related reasons, the parting concentrate was not defectively designed, even though less flammable substitutes were available. Under Indiana law, a product is not defectively designed where its dangerous properties are patent. Schemel v. General Motors Corp., 384 F.2d 802, 805 (7th Cir. 1967), cert. denied, 390 U.S. 945, 88 S.Ct. 1030, 19 L.Ed.2d 1134; J.I. Case Co. v. Sandefur, 245 Ind. 213, 222-223, 197 N.E.2d 519, 523 (1964); see also Cornette v. Searjeant Metal Products, Inc., supra, 147 Ind. App. at 57, 258 N.E.2d at 659 (Sharp, J., concurring) (product must be more dangerous than ordinary user would expect). (Again, although Schemel and J. I. Case deal with negligence, they apply with equal force to strict liability. See Prosser, supra, 659 n. 72, 660. See also Greeno v. Clark Equipment Co., 237 F. Supp. 427, 428-429 (N.D.Ind. 1965), in which the court said that "as in negligence law," obvious dangers are not a basis for liability under section 402A. Greeno was cited with approval in Cornette v. Searjeant Metal Products, Inc., supra, 147 Ind. App. at 52, n. 2, 56, 62, 258 N.E.2d at 656 n. 2, 658, 662.) The ordinary person would expect that a mixture of Smith's product and kerosene would ignite when exposed to the direct flame of an acetylene torch. Hence, the fact that it did so ignite does not prove that there was a defect.

Although we have considered separately the plaintiff's two theories — failure to warn and defective design — both theories suffer from the same fundamental flaw. While defects can take various forms under section 402A, the basic test is failure to meet the reasonable expectations of the ordinary user as to safety. See Greeno v. Clark Equipment Co., supra, 237 F. Supp. at 429; Posey v. Clark Equipment Co., supra, 409 F.2d at 563; Prosser, supra at 659. See also comments i and g to 402A. Even without the benefit of the added information a warning might provide, the ordinary user's reasonable expectation was, as we have shown, that the addition of kerosene to Smith's product would form a flammable substance. Since the product behaved as the ordinary user would expect, it was no more defective than the kerosene itself.

As in the Posey case, 409 F.2d at 564, and the Schemel case, 384 F.2d at 804-805, we conclude as a matter of law that the product was not defective. Because Indiana law is clear on this point, we deny plaintiff's motion to certify to the Indiana Supreme Court the questions of law involved in this case.

Affirmed.


Summaries of

Burton v. L. O. Smith Foundry Products Co.

United States Court of Appeals, Seventh Circuit
Jan 28, 1976
529 F.2d 108 (7th Cir. 1976)

holding that because the defendant had no control over the machine being used or the surrounding work space, the plaintiff's employer would have to provide the warnings

Summary of this case from Ramsey v. Ga. S. Univ. Advanced Dev. Ctr.

affirming summary judgment

Summary of this case from In re Lawrence W. Inlow Accident Litigation, (S.D.Ind. 2002)

affirming summary judgment for defendant under Indiana law; manufacturer of flammable liquid had no duty to warn all individual employees of buyer about dangers that were obvious to those who actually used liquid

Summary of this case from In re Lawrence W. Inlow Accident Litigation, (S.D.Ind. 2002)

affirming summary judgment where manufacturer had no duty to make known to purchaser-company properties of product of which they were already aware

Summary of this case from Baker v. Monsanto Co., (S.D.Ind. 1997)

applying Indiana law

Summary of this case from Carter v. American Oil Company

applying Indiana law

Summary of this case from Baker v. Monsanto Co., (S.D.Ind. 1997)

applying Indiana law

Summary of this case from Hoffman v. E.W. Bliss Co.

In Burton v. L.O. Smith Foundry Products Co., (7th Cir. 1976) 529 F.2d 108, the Seventh Circuit Court of Appeals held that a product may be defective because of manufacturing flaws, defective design, or failure to supply complete information about the product's dangers.

Summary of this case from Shanks v. A.F.E. Industries

In Burton, the manufacturer (Smith) supplied a highly flammable liquid used in conjunction with molding machines at an International Harvester plant.

Summary of this case from York v. Union Carbide Corp.

applying Indiana law

Summary of this case from York v. Union Carbide Corp.

applying Indiana law

Summary of this case from In re Asbestos Litigation
Case details for

Burton v. L. O. Smith Foundry Products Co.

Case Details

Full title:SHELBY J. BURTON, ADMINISTRATRIX OF THE ESTATE OF ROBERT LEE BURTON…

Court:United States Court of Appeals, Seventh Circuit

Date published: Jan 28, 1976

Citations

529 F.2d 108 (7th Cir. 1976)

Citing Cases

Baker v. Monsanto Co., (S.D.Ind. 1997)

When the defect being complained of is the failure to warn adequately, Indiana courts, as well as federal…

Kelley by Kelley v. Rival Mfg. Co.

1979); Stuckey v. Young Exploration Co., 586 P.2d 726, 730 (Okla. 1978); Kirkland v. General Motors Corp.,…