Section 86.1847-01 - [Effective 6/17/2024] Manufacturer in-use verification and in-use confirmatory testing; submittal of information and maintenance of records(a) The manufacturer who conducts or causes to be conducted testing of any motor vehicle under § 86.1845-01 shall establish, maintain and retain the following records organized and indexed by test group and evaporative/refueling family:(1) A record documenting correlation as prescribed by § 86.1845-01(e)(3) .(2) A description of all laboratory equipment calibrations and verifications as prescribed by subpart B of this part or otherwise as appropriate using good engineering judgment.(3)Procurement documentation. A description of the procurement area, a record of the source(s) of any list(s) of vehicles used as a basis for procurement, and a complete record of the number of vehicles rejected after positive vehicle owner response and reason(s) for manufacturer rejection of each rejected vehicle. A complete record of the number of vehicle owners/lessees in which attempt to contact was made and the number of vehicle owners/lessees actually contacted, the number of owners/lessees not contacted and the reasons and number of each for failure to contact, and the number of owners contacted who declined to participate.(4) All records required to be maintained under this paragraph shall be retained by the manufacturer for a period of eight (8) years after the end of production of the test group to which they relate.(b) The manufacturer who conducts or causes to be conducted testing of any motor vehicle under § 86.1845-01 shall submit to the Administrator on a quarterly calendar year basis, with the information provided to the Administrator within 30 days of the end of the quarter of each calendar year, the following records organized by test group and evaporative/refueling family.(1) A complete record of all emission tests performed, including tests results, the date of each test, and the phase mass values for fuel economy, carbon dioxide and each pollutant measured by the Federal Test Procedure and Supplemental Federal Test Procedure as prescribed by subpart B of this part.(2) For each test vehicle within a test group, a record and description of procedures and test results pertaining to any inspection (including the information listed in appendix III to this subpart), diagnostics, and maintenance performed on the test vehicle prior to testing in as-received condition.(3) A record and description of any inspection, diagnostics, and maintenance performed and/or testing (including emission results) of any vehicle tested subsequent to its initial as-received test.(c) The manufacturer who conducts or causes to be conducted testing of any motor vehicle under § 86.1845-01 shall submit to the Administrator a record of the name and location of the testing laboratory(s) to be used to conduct testing for each model year 30 working days prior to the initiation of testing of that model year.(d) The manufacturer of any test vehicle subject to § 86.1845-01 shall report to the Agency the test results (identifying the vehicle test group and emission test results) of any test vehicle in which the test vehicle fails to meet any applicable emission standard. The manufacturer must make this report within 72 hours of the completion of the testing of the test vehicle.(e) The manufacturer who conducts or causes to be conducted testing of any motor vehicle under § 86.1846-01 shall establish, maintain and retain the following organized and indexed records by test group or Agency-designated subset.(1) A description of all laboratory equipment calibrations and verifications as prescribed by subpart B of this part or by good engineering judgment.(2) Procurement documentation. A description of the procurement area, a record of the source(s) of any list(s) of vehicles used as a basis for procurement, a complete record of: the number of vehicle owners/lessees in which attempt to contact was made and the number of vehicle owners/lessees actually contacted; the number of owners/lessees not contacted and the reasons and number of each for failure to contact; the number of owners contacted who declined to participate; and a complete record of the number of vehicles rejected after positive vehicle owner response and reason(s) for manufacturer rejection of each rejected vehicle.(3) All records required to be maintained under this paragraph shall be retained by the manufacturer for a period of eight (8) years after the end of production of the test group to which they relate.(f) Within 30 working days of the completion of testing of a test group or Agency-designated subset performed under § 86.1846-01 , the manufacturer shall submit to the Administrator the following records organized by test group or Agency-designated subset.(1) A complete record of all emission tests performed, including tests results, the date of each test, and the phase mass values for fuel economy, carbon dioxide and each pollutant measured by the Federal Test Procedure and Supplemental Federal Test Procedure as prescribed by subpart B of this part.(2) For each test vehicle within a test group, a record and description of procedures and test results pertaining to any inspections, diagnostics, and maintenance performed on the test vehicle prior to any emission testing.(3) A record and description of any inspections, diagnostics, maintenance performed and/or testing (including emission results) of any test vehicle tested subsequent to its initial emission test.(g) Manufacturers of battery electric vehicles and plug-in hybrid electric vehicles certified under this subpart must meet the following reporting and recordkeeping requirements related to testing performed under §§ 86.1815-27(f)(2) and (3): (1) Submit the following records organized by monitor family and battery durability family related to Part A testing to verify accuracy of SOCE monitors within 30 days after completing low-mileage, intermediate-mileage, or high-mileage testing: (i) A complete record of all tests performed, the dates and location of testing, measured SOCE values for each vehicle, along with the corresponding displayed SOCE values at the start of testing.(ii) Test vehicle information, including model year, make, model, and odometer reading.(iii) A summary of statistical information showing whether the testing shows a pass or fail result.(2) Keep the following records related to testing under paragraph (g)(1) of this section: (i) Test reports submitted under paragraph (g)(1) of this section.(ii) Test facility information.(iii) Routine testing records, such as dynamometer trace, and temperature and humidity during testing.(3) Submit an annual report related to Part B testing to verify compliance with the Minimum Performance Requirement for SOCE, as applicable. Submit the report by October 1 for testing you perform over the preceding year or ask us to approve a different annual reporting period based on your practice for starting a new model year. Include the following information in your annual reports, organized by monitor family and battery durability family: (i) Displayed values of SOCE for each sampled vehicle, along with a description of each vehicle to identify its model year, make, model, odometer reading, and state of registration. Also include the date for assessing each selected vehicle.(ii) A summary of results to show whether 90 percent of sampled vehicles from each battery durability family meet the Minimum Performance Requirement.(iii) A description of how you randomly selected vehicles for testing, including a demonstration that you meet the requirement to select test vehicles from different U.S. states or territories. Provide a more detailed description of your random selection if you test more than 500 vehicles.(iv) A description of any selected vehicles excluded from the test results and the justification for excluding them.(v) Information regarding warranty claims and statistics on repairs for batteries and for other components or systems for each battery durability family that might influence a vehicle's electric energy consumption.(4) Keep the following records related to testing under paragraph (g)(3) of this section:(i) Test reports submitted under paragraph (g)(3) of this section.(ii) Documentation related to the method of selecting vehicles.(5) Keep records required under this paragraph (g) for eight years after submitting reports to EPA.(h) Manufacturers of high-GCWR vehicles subject to in-use testing under § 86.1845-04(j) must meet the reporting and recordkeeping requirements of 40 CFR 1036.430 and 1036.435 and include the following additional information: (1) Describe the trailer used for testing.(2) Identify the driving route, including total time and distance, and explain any departure from the planned driving route.(3) Demonstrate that you met the specification for loaded operation.