From Casetext: Smarter Legal Research

Temple v. Wean United, Inc.

Supreme Court of Ohio
Jun 29, 1977
50 Ohio St. 2d 317 (Ohio 1977)

Summary

holding that the duty to warn "does not extend to the speculative anticipation of how manufactured components, not in and of themselves dangerous or defective, can become potentially dangerous dependent upon the nature of their integration into a unit designed and assembled by another"

Summary of this case from Mohney v. U.S. Hockey, Inc.

Opinion

No. 76-946

Decided June 29, 1977.

Products liability — Power press injury — Alteration of safety device by purchaser — Standard for strict liability in tort — Liability of manufacturer or prior owner — Duty to warn user — Not applicable to potential dangers, when — Industrial Commission safety order — Properly followed, when.

1. One who sells any product in a defective condition unreasonably dangerous to the user or consumer or to his property is subject to liability for physical harm thereby caused to the ultimate user or consumer, or to his property, if (a) the seller is engaged in the business of selling such a product, and (b) it is expected to and does reach the user or consumer without substantial change in the condition in which it is sold.

2. The rule stated above applies although the seller has exercised all possible care in the preparation and sale of his product, and the user or consumer has not bought the product from or entered into any contractual relation with the seller.

3. Where at the time of manufacture and sale the dual activating buttons on a power press are located at shoulder height, and thereafter a purchaser of the press positions the buttons at waist height, facing upwards and 24 inches apart, there has been a "substantial change" from the condition in which the power press was originally sold. The purchaser's employee cannot, therefore, successfully sue the manufacturer or the prior owner of the press on a theory of strict liability in tort for injuries suffered as a result of her accidental depression of the operating buttons.

4. There is no duty to warn extending to the speculative anticipation of how manufactured components, not in and of themselves dangerous or defective, can become potentially dangerous dependent upon their integration into a unit designed and assembled by another.

5. Where an order of the Industrial Commission specifies that either a fixed barrier guard or a two-hand tripping device is an acceptable method of guarding a power press, a manufacturer is not negligent in designing a press which utilizes a two-hand tripping device.

APPEAL from the Court of Appeals for Auglaize County.

On January 25, 1972, appellant, Beverly A. Temple, was operating a Warco 75 ton power punch press in the course of her employment at Superior Metal Products, Inc. (Superior). As Mrs. Temple placed an aluminum extrusion into the back die of the press, an unknown number of extrusions fell from the bolster plate, in front of her, onto the dual operating buttons, causing the press to close on her arms. As a result, Mrs. Temple's hands and forearms were crushed, requiring amputation of both arms just below the elbow.

The history of the machine is material. The press was manufactured and sold in 1954 by Federal Machine Welder Company, now Wean United, Inc. (Wean), to a division of the General Motors Corporation (G.M.). At the time of manufacture two hand-operated "run" buttons were mounted on the uprights of the press, at shoulder level. In July of 1971, the press was sold by G.M. to Turner Industries, and Turner immediately sold the press to Temple's employer.

Upon receipt of the press, Superior personnel modified the operating control circuits by replacing the single clutch valve with a safer dual valve, and by replacing the original rotary switch. In addition, Superior installed new operating buttons which were manufactured by the Square D Company (Square D). Pursuant to a standard company policy, Superior's engineers positioned the buttons waist high, in an upward position, 24 inches apart. The press was then put into operation, stamping out metal bowls, no larger than nine inches in diameter.

On the day of the accident the dies were changed and 36 inch linear stock was run through the press. It is not disputed that the accident occurred when several pieces of the 36 inch stock fell off the bolster and bridged the dual operating buttons, thus simultaneously depressing them. Stated otherwise, it is clear that there was no malfunction in the press or in any of its component parts.

On January 18, 1974, Mrs. Temple, together with her husband, Gary L. Temple, filed a complaint against Wean, G.M. and Square D, and also against the Minster Machine Co. and Turner Industries, the latter two no longer remaining as parties to this action. During the months of June and July, 1974, appellants deposed individuals who had witnessed and investigated the accident, and also inspected the power press. Appellants subsequently served appellees with lengthy interrogatories, to which answers were filed over a period of several months.

On February 5, 1975, Mrs. Temple was deposed by appellees, and shortly thereafter all appellees filed motions for summary judgment. When appellants filed notices to depose certain of appellees' company officers, appellees moved for protective orders, seeking to delay such depositions until the trial court ruled upon their motions for summary judgment. After a hearing, on April 21, 1975, the trial court granted appellees' motions for protective orders.

During the next four months all parties filed memoranda in support of their respective positions, and on November 21, 1975, the trial court granted the motions for summary judgment as to all appellees.

The Court of Appeals affirmed the judgment, and the cause is now before this court pursuant to the allowance of a motion to certify the record.

Messrs. Tyack, Scott Colley, Mr. Michael F. Colley, and Mr. Dennis N. Balske, for appellants.

Blake, Blake Faulkner Co., L.P.A., Mr. Rodney R. Blake, Jr., Mr. Richard Wallace, Messrs. Finn, Manahan Pietrykowski, Mr. John A. Pietrykowski, Messrs. Wright, Harlor, Morris Arnold, Mr. Harry Wright, III, and Mr. Terrance M. Miller, for appellees.

I.


This is a products liability action brought under theories of negligence, implied warranty, and strict liability in tort. The latter two counts are virtually indistinguishable, and appellants concede by their brief that implied warranty has been included as a theory of liability in order to comply with the terminology of Ohio law.

Although we have referred to this theory of liability in various ways, including "strict liability in tort for breach of implied warranty of fitness for ordinary use" ( Gast v. Sears Roebuck Co. [1974], 39 Ohio St.2d 29, 31); "implied warranty, which is a form of strict liability in tort" ( McDonald v. Ford Motor Co. [1975], 42 Ohio St.2d 8, 10); and "strict liability" ( State Auto Mutual Ins. Co. v. Chrysler Corp. [1973], 36 Ohio St.2d 151, 156); it is recognized that this fictional "warranty" differs from those found in the sale of goods, since many of the traditional defenses and requirements arising out of the law of contracts are inapplicable. See Prosser, The Assault Upon the Citadel (Strict Liability to the Consumer), 69 Yale L.J. 1099 (1960).

The paramount Ohio decision in the law of products liability is Lonzrick v. Republic Steel Corp. (1966), 6 Ohio St.2d 227. In Lonzrick this court traced the "slow, orderly and evolutionary development" in this area, and noted that Rogers v. Toni Home Permanent Co. (1958), 167 Ohio St. 244, and Inglis v. American Motors Corp. (1965), 3 Ohio St.2d 132, provided the consumer with a cause of action in tort, based upon the breach of an express warranty, notwithstanding the lack of a contractual relationship between plaintiff and defendant. Whereas Rogers and Inglis imposed a warranty upon the manufacturer because of its advertising to the public, Lonzrick dispensed with this rationalization, and thus the doctrine of strict liability in tort was adopted by Ohio.

It is now well established that, in order for a party to recover based upon a strict liability in tort theory, it must be proven that: "(1) There was, in fact, a defect in the product manufactured and sold by the defendant; (2) such defect existed at the time the product left the hands of the defendant; and (3) the defect was the direct and proximate cause of the plaintiff's injuries or loss." State Auto Mutual Ins. Co. v. Chrysler Corp. (1973), 36 Ohio St.2d 151. Under Ohio law, a defect is considered to exist in a product which is not "of good and merchantable quality, fit and safe for * * * [its] ordinary intended use." Lonzrick, supra, at page 235.

Although acknowledging the absence of any mechanical malfunction, appellants contend that the power press was defective in that it was unreasonably dangerous and was placed in the hands of the user, Mrs. Temple, without adequate warning. This conception of defectiveness is premised upon Section 402 A of the Restatement of Torts 2d, Comment J, which states that: "In order to prevent the product from being unreasonably dangerous, the seller may be required to give directions or warning * * * as to its use." Although this court has never expressly adopted Section 402 A as the standard for strict liability in tort, we did, in Lonzrick, supra, cite Section 402A, as well as Greenman v. Yuba Power Products (1963), 59 Cal.2d 57, 377 P.2d 897, the first case to apply the principles underlying the section. Since Greenman was decided, the rule of the Restatement has been adopted or approved by the vast majority of courts which have considered it. Because there are virtually no distinctions between Ohio's "implied warranty in tort" theory and the Restatement version of strict liability in tort, and because the Restatement formulation, together with its numerous illustrative comments, greatly facilitates analysis in this area, we hereby approve Section 402 A of the Restatement of Torts 2d.

Section 402A (2 Restatement of Torts 2d 347) reads as follows:
"Special Liability of Seller of Product for Physical Harm to User or Consumer.
"(1) One who sells any product in a defective condition unreasonably dangerous to the user or consumer or to his property is subject to liability for physical harm thereby caused to the ultimate user or consumer, or to his property, if
"(a) the seller is engaged in the business of selling such a product, and
"(b) it is expected to and does reach the user or consumer without substantial change in the condition in which it is sold.
"(2) The rule stated in Subsection (1) applies although
"(a) the seller has exercised all possible care in the preparation and sale of his product, and
"(b) the user or consumer has not bought the product from or entered into any contractual relation with the seller."

E.g., O.S. Stapley Co. v. Miller (1968), 103 Ariz. 556, 447 P.2d 248; Bradford v. Bendix-Westinghouse Auto. Air Brake Co. (1973), 33 Colo. App. 99, 517 P.2d 406; Garthwait v. Burgio (1965), 153Conn. 284, 216 A.2d 189; Stewart v. Budget Rent-A-Car Corp. (1970), 52 Haw. 71, 470 P.2d 240; Shields v. Morton Chemical Co. (1974), 95 Idaho 674, 518 P.2d 857; Suvada v. White Motor Co. (1965), 32 Ill.2d 612, 210 N.E.2d 182; Cornette v. Searjeant Metal Products, Inc. (1970), 147 Ind. App. 46, 258 N.E.2d 652; Hawkeye-Security Ins. Co. v. Ford Motor Co. (Iowa 1970), 174 N.W.2d 672; Dealers Transport Co. v. Battery Distributing Co. (Ky. 1966), 402 S.W.2d 441; State Stove Mfg. Co. v. Hodges (Miss. 1966), 189 So.2d 113; Webb v. Zern (1966), 422 Pa. 424, 220 A.2d 853; Ritter v. Narragansett Elec. Co. (1971), 109 R.I. 176, 283 A.2d 255; McKisson v. Sales Affiliates, Inc. (Tex. 1967), 416 S.W.2d 787; Dippel v. Sciano (1967), 37 Wis.2d 443, 155 N.W.2d 55.

See, e.g., Note, Products Liability: A Synopsis, 30 Ohio St. L.J. 551 (1969).

II.

Under Section 402A, as well as under our case law, a plaintiff must prove that the product was defective at the time it left the seller's hands. Lonzrick, supra, at page 237; Section 402A, supra, at Comment G. In addition, Section 402A(1)(b) imposes strict liability only where the defective product reaches "the user or consumer without substantial change in the condition in which it is sold."

The evidence of record reveals that prior to the date of the accident Superior had a company policy which specified that all power press activating buttons be located facing upward, waist high, 24 inches apart. Pursuant to this policy, upon receipt of the press, Superior altered the existing method of guarding by lowering the buttons, which were at that time shoulder high. Clearly, in relation to the danger of unintentional activation, this alteration was a "substantial change" within the meaning of Section 402A(1)(b). Indeed, it is our conclusion that there was no original defect of any sort in the punch press, and that, as a matter of law, Superior's alteration of the safety device, coupled with the utilization of the press for the stamping of stock long enough to bridge the 24 inch gap between the buttons, was the sole responsible cause of the maiming of Mrs. Temple.

This holding is in harmony with the decisions of other courts wherein workers were injured after there had been substantial changes, subsequent to purchase, in the condition of a power punch press.

In Hanlon v. Cyril Bath Co. (C.A. 3, 1975), 541 F.2d 343, the court reviewed a products liability suit brought against the manufacturer of a power press to recover for injuries which purchaser's employee sustained when he accidentally activated the machine. The starting mechanism orginally supplied with the press was a treadle, which required the operator to lift his foot a considerable distance and exert some 65 pounds of downward pressure to activate the machine. After purchasing the press, plaintiff's employer substituted an easily activated portable electric foot switch for the treadle. The court held that this substitution was a substantial change in the condition in which the press was sold, and that the defendant manufacturer was entitled to a directed verdict.

In Keet v. Service Machine Company (C.A. 6, 1972), 472 F.2d 138, the court reviewed a products liability action brought against the manufacturer of a punch press which was later sold to plaintiff's employer. Unlike the instant cause, plaintiff established that the press malfunctioned, resulting in the severance of his right hand. The court held, however, that because there was no substantial evidence tending to prove that the machine was defective at the time it was manufactured and sold to plaintiff's employer, and there was evidence that the employer had made repairs on the machine prior to the accident, a verdict could properly have been directed for defendant-manufacturer.

In Hardy v. Hull Corp. (C.A. 9, 1971), 446 F.2d 34, the court reviewed an action, brought under the theory of strict liability, by a plaintiff whose thumbs were crushed in a mold press sold by the defendant-manufacturer to her employer. The court noted that the evidence failed to establish that the press, as it was originally sold, was in a defective condition, or was unreasonably dangerous. Rather, the evidence disclosed that the press, after purchase, had been modified by plaintiff's employer, and that such modifications made it dangerous. Accordingly, the court held that a verdict was properly directed for the manufacturer.

Although the above cases provide sufficient support for our decision to absolve the manufacturer, Wean, and the subsequent vendor, G.M., from strict tort liability to appellants, we have not as yet specifically addressed the case against Square D. This appellee manufactured the operating buttons which were ordered and installed on the Warco press by Superior.

We note that the Caveat to Section 402A states that "[t]he Institute expresses no opinion as to whether the rules stated in this section may not apply * * * (3) to the seller of a component part of a product to be assembled." In our opinion, the obligation that generates the duty to warn does not extend to the speculative anticipation of how manufactured components, not in and of themselves dangerous or defective, can become potentially dangerous dependent upon the nature of their integration into a unit designed and assembled by another. Because of limited contact with Superior, there is no indication that Square D could have known that its components were to be fashioned or fabricated into the power press in the particular manner that they were.

Appellants, however, also point out that among the hundreds of items manufactured by Square D were horseshoe-shaped button guards, and that it was thus their duty to warn that the button assembly was potentially dangerous without such guards. This argument must fail, since the deposition of Superior's engineer reveals that several years prior to the accident the company was aware that the button guard could be purchased, and that such guarding would prevent unintentional depression of the buttons. Manifestly, it would be futile to require that Square D notify the employee of that which the responsible party, the employer, was already aware.

III.

We have thus far discussed appellees' liability in terms of strict tort liability. It is, however, apparent that the rule imposing obligation on the manufacturer or seller to give suitable warning of a dangerous propensity of a product is a rule fixing a standard of care, and any tort resulting from the failure to meet this duty is, in essence, a negligent act. See Prosser on Torts (4 Ed.), Section 96. In Ohio, the case law has established that a manufacturer or vendor is negligent when he has knowledge of a latent defect rendering a product unsafe and fails to provide a warning of such defect. Sams v. Englewood Ready-Mix Corp. (1969), 22 Ohio App.2d 168; Burns v. Pennsylvania Rubber Supply Co. (1961), 117 Ohio App. 12.

This court need not determine if the location of the operating buttons was a latent or obvious defect. As we have noted above, the defect arose by virtue of Superior's alteration, after purchase, of the dual activating button device. It is evident that appellees did not know, nor could they have known, of a defect that was created by a subsequent purchaser. Therefore, they cannot be held liable under the theory of negligent failure to warn.

Appellants have also alleged that Wean negligently designed the power press. To date, no Ohio case has specifically defined the duties of a manufacturer relative to product design, but the general rule is that "* * * [i]t is the duty of a manufacturer to use reasonable care under the circumstances to so design his product as to make it not accident or foolproof, but safe for the use for which it is intended." Gossett v. Chrysler Corp. (C.A. 6, 1966), 359 F.2d 84, 87.

Appellants contend that the press was negligently designed, in that Wean failed to provide a fixed barrier guard which would prevent the hands or fingers of the operator from entering into the danger zone between the die and the ram. This court is aware of the difficulty and open-endedness inherent in passing judgment upon the reasonableness of a manufacturer's conscious design choices. See Henderson, Judicial Review of Manufacturers' Conscious Design Choices: The Limits of Adjudication, 73 Colum. L. Rev. 1531 (1973). For aid in reducing this open-endedness to a manageable level, we look to statutory regulation.

R.C. 4101.11 imposes upon the employer the duty to protect employees by, inter alia, following and obeying orders of the Industrial Commission. See State, ex rel. Holdosh v. Indus. Comm. (1948), 149 Ohio St. 179. One such order, Industrial Commission Safety Code IC-5, provides as follows:

"IC-5-08.03 POWER PRESSES

"(A) GUARDING

"(1) Construction

"Every power press in use shall be constructed, or shall be guarded to prevent the hands or fingers of the operator from entering the danger zone during the operating cycle.

"* * *

"(B) ACCEPTABLE METHODS OF GUARDING

"(1) Manual Feed Presses, by:

"(a) Gate Guard * * *

"(b) Fixed Barrier Guard * * *

"(c) Sweep Guard * * *

"(d) Pull and Restraint or Hold-Back Guard * * *

"(e) Two-Hand Tripping Device * * *

"(f) Limitation of ram stroke * * *

"(g) Electronic Guard * * *

"(h) Photoelectric or Selenium Guard * * *

"(i) Magnetic Guard * * *

"(j) Use of Special Tools * * *" (Emphasis added.)

In view of this regulation, which specifies that either a fixed barrier guard or a two-hand tripping device (with which this press was equipped) are acceptable methods of guarding, this court holds that the question of whether or not the manufacturer was negligent in not providing fixed barrier guards should be answered, as a matter of law, in the negative.

IV.

Both in this court and in the Court of Appeals below appellants have argued that the trial court erred in granting appellees' motions for protective orders and for summary judgment.

The record indicates that representatives of all the parties to this cause were present at the depositions of Superior's company president, chief engineer, and press room foreman. The testimony of these three individuals fully supports our conclusion, noted above, that the sole responsible cause of the injuries received by Mrs. Temple was Superior's modification of the method of guarding on the power press.

Civ. R. 56(C) specifically provides that before summary judgment may be granted, it must be determined that: (1) No genuine issue as to any material fact remains to be litigated; (2) the moving party is entitled to judgment as a matter of law; and (3) it appears from the evidence that reasonable minds can come to but one conclusion, and viewing such evidence most strongly in favor of the party against whom the motion for summary judgment is made, that conclusion is adverse to that party.

Applying the standard set out above to both the facts of record and the formulation of strict liability in tort contained in Section 402A of the Restatement of Torts 2d, it is our conclusion that summary judgment was properly rendered for the appellees.

With regard to appellants' assertion that the trial court committed error by granting appellees' motions for protective orders, we can see no prejudice resulting to the rights of the appellants in light of our holding that appellees are entitled to judgment as a matter of law based solely upon the testimony of Superior company employees.

For the foregoing reasons, the judgment of the Court of Appeals is affirmed.

Judgment affirmed.

W. BROWN, SWEENEY and LOCHER, JJ., concur.

O'NEILL, C.J., HERBERT and P. BROWN, JJ., concur in paragraphs three, four and five of the syllabus and in the judgment.


I concur in paragraphs three, four and five of the syllabus and the judgment.

Paragraphs one and two of the syllabus are not necessary to the decision in this case.

The majority opinion, at page 323, states as follows:

"* * * it is our conclusion that there was no original defect of any sort in the punch press, and that, as a matter of law, Superior's alteration of the safety device, coupled with the utilization of the press for the stamping of stock long enough to bridge the 24 inch gap between the [safety] buttons, was the sole responsible cause of the maiming of Mrs. Temple."

That language forms the basis for the formulation of paragraph three of the syllabus, which rule is dispositive of this case except for the issue of the safety button guards. Paragraph four of the syllabus states the rule which is dispositive of that issue.

The holding of the majority that the sole responsible cause of the injury to the plaintiff was the acts of her employer, and the further holding that there was no original defect of any sort in the punch press, make it unnecessary and inappropriate to determine in general, without facts upon which to base a rule of law, what sort of defect would make the original manufacturer and the successor seller liable to the injured employee on the theory of strict liability in tort as a matter of law.

HERBERT and P. BROWN, JJ., concur in the foregoing concurring opinion.


Summaries of

Temple v. Wean United, Inc.

Supreme Court of Ohio
Jun 29, 1977
50 Ohio St. 2d 317 (Ohio 1977)

holding that the duty to warn "does not extend to the speculative anticipation of how manufactured components, not in and of themselves dangerous or defective, can become potentially dangerous dependent upon the nature of their integration into a unit designed and assembled by another"

Summary of this case from Mohney v. U.S. Hockey, Inc.

holding duty to warn does not extend to speculative anticipation of how manufactured components, not in and of themselves dangerous or defective, can become potentially dangerous depending on integration into unit designed and assembled by another

Summary of this case from Zaza v. Marquess & Nell, Inc.

adopting section 402A of the Restatement (Second) of Torts

Summary of this case from Adkins v. GAF Corp.

adopting § 402A of the Restatement (Second) of Torts

Summary of this case from Adair v. Koppers Co., Inc.

adopting Section 402A and noting, “Under Ohio law, a defect is considered to exist in a product which is not of good and merchantable quality, fit and safe for its ordinary intended use.”

Summary of this case from Kuns v. Ford Motor Co.

In Temple v. Wean United, Inc., 364 N.E.2d 267 (Ohio 1977), the Ohio Supreme Court held that the supplier of operating buttons in a power press, which when assembled and modified by third parties caused serious injuries to the plaintiff, did not have a duty to warn end-users of the dangers posed by the inclusion of those buttons in the final power press.

Summary of this case from Jacobs v. E.I. du Pont de Nemours & Co.

In Temple, the court found no negligence in a component part manufacturer's failure to warn of a dangerous condition created by a purchaser's modification of a product when that modification could not have been anticipated by the manufacturer.

Summary of this case from Miles v. Kohli & Kaliher Associates, Ltd.

In Temple, the plaintiff was injured by a mechanical press that was accidentally activated when a falling object came to rest simultaneously on its two operating buttons.

Summary of this case from Miles v. Kohli & Kaliher Associates, Ltd.

adding a different clutch valve, rotary switch and operating buttons on a power press constituted a substantial change

Summary of this case from Briney v. Sears, Roebuck Co.

In Temple v. Wean United, Inc., 50 Ohio St.2d 317, 327, 364 N.E.2d 267 (1977), the Ohio Supreme Court held that compliance with Ohio Industrial Code regulations for power presses demonstrated, as a matter of law, that the manufacturer was not negligent. Cf. Owens v. Allis Chalmers Corp., 414 Mich. 413, 326 N.E.2d 372 (1980) (manufacturer compliance with government and industry standards admissible regarding standard of care, though not conclusive).

Summary of this case from Bailey v. V O Press Co., Inc.

In Temple v. Wean United, Inc., 50 Ohio St.2d 317, 364 N.E.2d 267 (1977), the Ohio Supreme Court adopted Restatement of Torts § 402A, but limited it to defective products. It reiterated that the general rule in Ohio concerning defective product design is a negligence standard.

Summary of this case from Birchfield v. International Harvester Co.

In Temple, the plaintiff lost both arms below the elbow when a power punch came down on them. The plaintiff sued the manufacturer under both strict liability and negligence theories.

Summary of this case from Birchfield v. International Harvester Co.

In Temple, the court construed an Ohio statute that required employers to comply with orders of the Ohio Industrial Commission. One of these orders set forth a list of "Acceptable Methods of Guarding" power presses.

Summary of this case from Sours v. General Motors Corp.

drawing from Restatement (Second) Torts, § 402A

Summary of this case from Moran v. Johns-Manville Sales Corp.

In Temple v. Wean United, Inc., 50 Ohio St.2d 317 (1977), the Supreme Court of Ohio imposed strict product liability on nonmanufacturing sellers of defective products.

Summary of this case from Simpson v. Tim Shoop, Warden

providing that a plaintiff must prove that the product was defective when it was manufactured and sold by the defendant, that the defect existed when it left the defendant's control, and that the defect proximately caused the plaintiff's injury or loss

Summary of this case from Waters v. Electrolux Home Prods., Inc.

In Temple v. Wean, supra, at 320, 364 N.E.2d 267, the Ohio Supreme Court held that a claim for breach of implied warranty is "virtually indistinguishable" from a claim for strict liability in tort.

Summary of this case from Jones v. American Tobacco Co.

In Temple the court adopted the doctrine of strict liability in tort by approving § 402A of the Restatement of Torts 2d.

Summary of this case from Bailey v. ITT Grinnell Corp.

In Temple v. Wean United, 50 Ohio St.2d 317, 322, 364 N.E.2d 267 (1977), the Ohio Supreme Court approved Section 402A of the Restatement of Torts 2d.

Summary of this case from Ohio Casualty Insurance v. Ford Motor Co.

In Temple v. Wean, supra, the Ohio Supreme Court stated that the "restatement formulation, together with its numerous illustrative comments, greatly facilitates analysis" in the area of strict liability in tort.

Summary of this case from Ohio Casualty Insurance v. Ford Motor Co.

In Temple, this court had stated for the first time that nonmanufacturing sellers of a defective product could be liable for injuries the product caused.

Summary of this case from State ex rel. Walmart, Inc. v. Hixson

In Temple, this court held that suppliers — not just manufacturers — were strictly liable for defective products they supplied.

Summary of this case from Dicenzo v. A-Best Prods. Co., Inc.

focusing on whether alteration constituted "sole responsible cause" of plaintiff's injury

Summary of this case from Potter v. Chicago Pneumatic Tool Company

In Temple v. Wean United, Inc. (1977), 50 Ohio St.2d 317, 4 O.O.3d 466, 364 N.E.2d 267, this court adopted Section 402A of the Restatement of the Law 2d, Torts (1965).

Summary of this case from Mcauliffe v. W. States Import Co., Inc.

In Temple we said: "[T]he obligation that generates the duty to warn does not extend to the speculative anticipation of how manufactured components, not in and of themselves dangerous or defective, can become potentially dangerous dependent upon the nature of their integration into a unit designed and assembled by another."

Summary of this case from Leibreich v. A.J. Refrigeration, Inc.
Case details for

Temple v. Wean United, Inc.

Case Details

Full title:TEMPLE ET AL., APPELLANTS, v. WEAN UNITED, INC., ET AL., APPELLEES

Court:Supreme Court of Ohio

Date published: Jun 29, 1977

Citations

50 Ohio St. 2d 317 (Ohio 1977)
364 N.E.2d 267

Citing Cases

Dicenzo v. A-Best Prods. Co., Inc.

I. Introduction {¶ 1} In this case, we must determine whether our decision in Temple v. Wean United, Inc.…

Crislip v. TCH Liquidating Co.

1. An individual injured by a known dangerous product may prosecute a strict liability claim arising from…